Gate valves are suitable for media such as steam and oil, as well as media containing granular solids and high viscosity, and are suitable for use in venting and low-vacuum systems.

Applicable media and temperature ranges of valves of different materials

The pilot-operated pressure reducing valve uses the opening of the opening and closing parts in the control valve body to adjust the flow of the medium, reduce the pressure of the medium, and adjust the opening of the opening and closing parts with the help of the pressure behind the valve, so that the pressure behind the valve is kept within a certain range.

The multi-turn electric actuator is a driving device for the valve to open, close or adjust the control, which is used to control the opening and closing of the valve. It can accurately act according to the control instructions and is a commonly used driving device for remote control, centralized control and automatic control of various valves and dampers.

Nowadays, due to the development of science and technology and the advancement of materials, the materials used to manufacture butterfly valves are becoming more and more diverse. When a user chooses a butterfly valve, the material is often an important indicator for his consideration. So, without relying on the instructions of Flange Butterfly Valve Supplier, how can users identify the material of the butterfly valve by themselves?

Flexible rubber joints, referred to as rubber joints, are made of fabric-reinforced rubber parts and flat joints, sleeve metal flanges or threaded pipe flanges. They are used for pipeline vibration isolation, noise reduction, and displacement compensation. It is a pipe joint with high elasticity, high air tightness, medium resistance, and weather resistance. Flexible rubber joints are also called shock-absorbing throats, flexible joints, rubber flexible joints, pipeline shock absorbers, e

Knife gate valve, additionally called knife kind gate valve, is a kind of gate valve. The architectural attribute of the knife gate valve is that there is an oblique cut at the bottom of its valve plate. Like a knife edge, this knife-shaped oblique cut can conveniently cut off the medium distributing in the pipe, so that the valve can be shut without being obstructed by the tool. Below is the structure representation of the knife gate shutoff.

Where there is a pipeline, the valve is inseparable. The valve is installed on the pipe and manages the circulation of the fluid medium in the pipeline. It is an important control part. However, the valve is likewise a wearable component. A common valve loss in our life is that the valve is not tightly secured, leading to leakage.

A check valve, also known as a non-return valve or one-way valve, is a mechanical device that allows fluid (liquid or gas) to flow in only one direction while preventing reverse flow. The working principle of a check valve is relatively simple.

Butterfly valve is a kind of valve that uses a circular butterfly plate as a start and close part and rotates with the valve stem to open, close and adjust the fluid channel. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, and the rotation angle is between 0° and 90°. When it rotates to 90°, the valve is in a fully open state.